HA Series

High Speed Blown Film Line

A state of the art blown film line for producing HDPE, LDPE, LLDPE, and MLLDPE tubular film and sheeting .A specially designed screw and barrel ensures high output at lower melt temperatures, which in conjunction with the Dual lip air ring allows better cooling efficiency, better gauge control of the plastic and a more stable bubble which produces superior film quality and faster output.

Models	HA-45	HA-55	HA-65	HA-80
Size of Extruder	45mm	5mm	65mm	80mm
L/D Ratio	28;1	28;1	28;1	28;1
Film Lay flat width	650mm	1050mm	1350mm	1800mm
Output capacity kg/h (LDPE)	60	90	130	160
Main Drive Motor	30HP	40HP	VS 50HP	VS 75HP
Plastic Compatibility	HDPE, LDPE, MLLDPE, and LLDPE

CE Series

Co-Extrusion Blown Film Co-Extrusion blown film is used to produce two or multi layer co-extruded tubular film or sheeting that is used for either cosmetic or strength purposes. The process of co-extrusion can save money by processing recycled material in the middle or inside of virgin or compounded material.

Models	CE-45	CE-55	CE-65	CE-80
Size of Extruder	45mm x 2	5mm x 2	65mm x 2	80mm x 2
L/D Ratio	26;1	26;1	28;1	28;1
Film Lay flat width	650mm	1050mm	1350mm	1800mm
Output capacity kg/h (LDPE)	60	90	130	160
Main Drive Motor	20HPVSx2	30HPVSx2	40HPVSx2	60HPVSx2

HNT Series

3 in 1 plastic waste recycling plant

A unique solution to saving power and labour. The raw material is fed into an agglomerater which once processed passes the material to the extruder and then onto a pelletiser to produce high quality pellets at a fraction of the cost with the following processes:

	The shredding drum reduces the bulk of film, fires, strips, chips, flakes and bottles into a densified mass, thus producing heat and blending the material at the same time.
	The warm densified material is fed directly into the screw (saving up to 40% on power and labour over conventional methods) this also reduces wear on the barrel and screw.
	The extruded material is then fed through a pelletiser and the finished pellets are conveyed to a storage tank (with the non uniform lumps separated)

Models	HNT-85	HNT-100	HNT-120
Size of Extruder	85mm	100mm	120mm
L/D Ratio	20/30 V	20/30 V	20/30 V
Output capacity kg/h (LDPE)	150-200	250-350	300-500
Main Drive Motor (Shredder)	40HP	75HP	100HP
Main Drive Motor (Extruder)	50/60HP	75/100HP	100/125HP
Plastic Compatibility	LDPE, LLDPE, HDPE, PP, ABS, and PS

MB Series

Compact blown film line These film lines are ideal for producing narrow film or where space is at a premium or a budget at its tightest. All the film line (extruder, take up tower and winder) are integrated and seated on a common base thus saving space and set up costs dramatically.

Models	MB-45	MB-35
Size of Extruder	45mm	35mm
L/D Ratio	26;1	26;1
Film Lay flat width	600mm	400mm
Output capacity kg/h (LDPE)	45	35
Main Drive Motor	VS 20HP	VS 15 HP
Die Head	Inflation Spiral Type
Plastic Compatibility	LDPE, HDPE, and LLDPE

PP Series

Speciality blown film line for Polypropylene The PP series of extruders are specially designed for processing Polypropylene. The film is cooled by water and air for a high gloss and transparency finish. An optional rotating die is available to further enhance the film quality.

Models	PP-45	PP-55	PP-65	PP-80
Size of Extruder	45	55	65	80
L/D Ratio	26;1	26;1	26;1	26;1
Film Lay flat width	450mm	600mm	700mm	1000mm
Output capacity kg/h (LDPE)	30	45	60	95
Main Drive Motor	15HP VS	25HP VS	30HP VS	50HP VS
Die Head (Air + Water Ring)	150mm	200mm	250mm	400mm
Plastic Compatibility	Polypropylene

TR Series

Plastic Waste Recycling/Compounding/Colouring lines

The TR series contains a wide range of extruders and pelletisers for recycling and compounding PE, PP, ABS, and PS. The long L/D ratio of the extruder provides better mixing and a higher output before it is then fed through an adjustable pelletiser before being cooled in a specially designed water swirl, and dried through a perforated vibrating table that separates the pellets from oversize lumps and clumps

Models	TR-65	TR-85	TR-100	TR-120	TR-150	TR-180
Size of Extruder	65	85	100	120	150	180
L/D Ratio	30;1	30;1	30;1	30;1	30;1	30;1
Output capacity kg/h (LDPE)	50-125	150-200	250-300	400-500	800- 1000	1000- 1200
Main Drive Motor	50HP	75HP	100HP	150HP	250HP	250HP
Die Head Cutter	Adjustable with 2 or 4 cutting blades
Plastic Compatibility	HDPE, LDPE, LLDPE, PP, ABS, PS (waste or granules)

YM Series

A compact blown film line with oscillating tower These are very compact film lines, which are ideal for producing narrow film in HDPE, LLDPE, or LDPE. The oscillating tower ensures the manufacture of perfectly flat reels of film, because any imperfections or distortions from the die are evenly spread across the whole width of the film instead of being concentrated in one area. This allows the film to unwind perfectly flat which means converting into bags or printing on it is far easier.

Models	YM-40	YM-45
Size of Extruder	40mm	45mm
L/D Ratio	26;1	26;1
Film Lay flat width	300mm	500mm
Output capacity kg/h (LDPE)	35	45
Main Drive Motor	10HP	15 HP
Die Head	Inflation Spiral Type
Plastic Compatibility	LDPE, HDPE, and LLDPE

YMC Series

A co extrusion compact blown film line with oscillating tower As the YM series but with 2 or 3extruders for co extrusion.

PVC Series

A PVC sheet manufacturing line
The PVC series is manufactured with a special screw and internal water cooling system that allows PVC to be mixed and melted quickly without overheating ( a problem for PVC) ,producing high outputs and excellent quality.

Models	PVC-90
Size of Extruder	90mm
L/D Ratio	30;1
Film Lay flat width	400-1000mm
Output capacity kg/h (LDPE)	120
Main Drive Motor	100HP
Die Head	T-Die
Plastic Compatibility	PVC